Tecasint 2021
Overview
What is the Material: PI 15% Graphite is an imidized material filled with 15% graphite.
Key Material Features: This material is beneficial in applications requiring improved friction and wear , while maintaining the properties of other PI materials including extreme temperature resistance, diverse chemical resistance, strength, and dimensional stability.
Improved sliding properties due to 15w% graphite. The electrical conductivity is also better comparing to the natural Tecasint 2011. Series of Tecasint 2000: have very high modulus, high rigidity, but compared to series of 1000 reduced moisture adsorption beside higher toughness and machining capability. While TECASINT 2021 contains 15% graphite which offer improved wear resistance and a lower coefficient of friction. © 2005-2021 CBS INTERACTIVE ALL RIGHTS RESERVED. CBS Sports is a registered trademark of CBS Broadcasting Inc.
Other Considerations: This material is attacked by hot water/steam.
Physical
| Property | Value | Typical ASTM Test |
|---|---|---|
| Chemical Designation | (PI) Polyimide | |
| Trade Names (®, ™) | Tecasint 2021, Vespel SP-21, Duratron PI D7015G | |
| Filler | 15% Graphite | |
| Color | Black | |
| Density (g/cm^3) | 1.46 | D 792 |
Mechanical
| Property | Value | Typical ASTM Test |
|---|---|---|
| Modulus of Elasticity (Tensile Test) (psi) | 638000 | D 638 |
| Tensile Strength at Yield (psi) | 14645 | D 638 |
| Elongation at Break (%) | 3.0 | D 638 |
| Flexural Strength (psi) | 20700 | D 790 |
| Modulus of Elasticity (Flexural Test) (psi) | 587000 | D 790 |
| Compression Strength: 10% Strain (psi) | 19300 | D 695 |
| Compression Strength: 1% Strain (psi) | 4200 | D 695 |
| Compression Modulus (psi) | 420000 | D 695 |
| Impact Strength (Izod) (ft-lbs/in) | 0.80 | D 256 |
| Hardness (R) | 126 | D 785 |
| Hardness (D) | 87 | D 785 |
| Hardness (M) | 73 | D 785 |
| Coefficient of Friction (Kinetic, 40 psi, 50 fpm) | 0.25 | D 3702 |
| Coefficient of Friction (Static) | 0.23 | D 3702 |
| Wear (K) Factor (in^3-min/ft-lbs-hr) (Against Steel, 40 psi, 50 fpm) | 1.00E-9 | D 3702 |
Tecasint 2021 Black
Thermal
| Property | Value | Typical ASTM Test |
|---|---|---|
| Glass Transistion Temperature (°F) | 660 | D 3418 |
| Deflection Temperature (°F) (264 psi) | 600 | D 648 |
| Service Temperature Continuous (°F) | 536 | |
| Service Temperature Intermittent (°F) | 626 | |
| Thermal Expansion (CLTE) (in/in/°F) | 2.30E-5 | D 696 |
| Thermal Conductivity (BTU-in/hr-ft^2-°F) | 2.7 |
Electrical
| Property | Value | Typical ASTM Test |
|---|---|---|
| Dielectric Strength (V/mil) | 186 | D 149 |
| Dissipation Factor (1MHz) | 0.007 | D 150 |
| Dielectric Constant (1MHz) | 5.42 | D 150 |
Other
Tecasint 2021
| Property | Value | Typical ASTM Test |
|---|---|---|
| Moisture Absorption (%) (24 Hours) | 0.44 | D 570 |
| Flammability | V-0 |